Painting contractor license illinois

If you have a partnership or sole proprietorship you must register any fictitious name with the court in the jurisdiction in which your company is located. You must provide documentation of any fictitious name as part of your application to the Board for Contractors.

While you may be as creative as you would like in developing a fictitious name, it must not indicate that you do work that is not allowed by your license. Step Three — Determine the type of license your company will need. Choose your license class. Licenses are issued in one of three license classes; A, B, or C. The class of a license determines what, if any, monetary restrictions are placed on the size of contracts or projects you may perform.

There are no monetary restrictions for Class A licenses. It is important to select the right class of license for the amount of work your company will be performing as exceeding the limits of your license is a violation of the regulations and could result in disciplinary action being taken by the Board against the licensee.

It is also important to remember that each class of license has different financial and experience requirements. Even though you may want a Class A license, you may not meet the eligibility criteria for one, so be sure that you review all of the eligibility requirements before submitting your application.

Choose your specialty. Now that you have determined how much work you are going to be allowed to perform with your license, you must determine what you are going to do. Contractor licenses have classifications and specialties that identify the type of work that may be performed with the license. These classifications and specialties are identified as three letter abbreviations that are printed on the bottom of the license.

The definition of each of the classifications and specialties can be found in the Board for Contractors Regulations. It is important to select the specialty that best describes the work your company will be performing as working outside the scope of your license is a violation of the regulations and could result in disciplinary action against the license holder.

In order to hold a specialty on your license the Qualified Individual QI must meet all of the eligibility criteria. See Step Five for additional information about the QI.

Step Four — Identify your Responsible Management. All licensed contractors are required, by law, to identify officers, members, partners, owners, etc. These are the individuals responsible for the license and for ensuring that all regulations and statutes are followed.

The individuals that must be identified depend on the types of business entity formed for your company. Sole proprietorships, for example, must only identify the one individual who owns the business. In order to complete the application you must provide the names of these individuals, their birthdates, Social Security Numbers OR Virginia DMV Control Number, and their address and you must include a copy of a government issued photo ID.

Step Five — Identify your Qualified Individual s. You must have a Qualified Individual QI for each of the specialties wanted on the license. The QI must be either a bona fide full-time employee minimum 30 hours per week and not a employee OR one of the members of Responsible Management identified in step four.

All QIs are required to have experience in the specialty they will be linked to and the amount of that experience is determined by the class of license. The QI for a Class A license must have five years of experience in the specialty, Class B must have three years of experience, and Class C two years of experience. The type of work that may be counted towards meeting the experience requirements can be found in the definition of each specialty listed in the Board for Contractors Regulations.

Qualified Individuals must have an additional license or certification OR complete a technical examination that is based on the scope of work allowed by that particular specialty. Trade-related specialties, for example, require that the QI hold a valid Master Tradesman license, issued by the Board for Contractors, in the appropriate specialty. In another example, the QI of the home improvement specialty must successfully complete the home improvement technical examination.

You can find a list of the specialties that have additional QI requirements on the Trade Related Examinations and Qualifications Information sheet that is included in the application packet. Step Six — Identify your Designated Employee and complete the examination.

Class A and Class B contractors must have a Designated Employee who has passed the required portions of the examination. As with the Qualified Individual, the Designated Employee must be a member of Responsible Management or a bona fide full-time employee. All Designated Employees for Class B licenses must successfully complete the General and Virginia portions of the examination.

All Designated Employees for Class A licenses must successfully complete the General, Virginia, and Advanced portions of the examination. Please note that there is no Designated Employee for Class C licenses. Step Seven — Complete the pre-license education course. All applicants for licensure as a contractor all classes are required to have either a member of Responsible Management or their Designated Employee for Class A and Class B license only successfully complete a pre-license education course that has been approved by the Board for Contractors.

There are several dozen approved courses that are available that can be used to meet this requirement. Most are given in the classroom, but some providers offer online or correspondence courses.

While the Board approves these courses, the providers are permitted to set their own fees, schedules, and locations, so you should check the list of providers and contact the ones that best meet your needs. You may download a list of approved providers from our website. Step Eight — Complete the entire application. It is important that all items on the application be completed.

Failing to complete an item will result in a delay in the processing of your application. If you have a question about an item on any application form please email the Board for Contractors at contractor dpor. Some of the questions may, depending on your answer, require that you provide additional documentation.

Please be sure to carefully read what additional information may be needed, as failure to provide everything that is required will result in a delay in processing your application. Step Nine — Send the application to the Board with the appropriate fee.

You must submit the appropriate fee along with your application. Each form has the fee that must be submitted listed on the first page of that form. Applications received without a fee are returned to the applicant and no additional action is taken. If you send in the wrong fee, it may delay the processing of your application.

Please note that fees are non-refundable so, if you do not meet the eligibility requirements licensure, you are not issued a refund of the application fee, but may be eligible for a refund of your Recovery Fund assessment.

Step Ten — Be patient while the licensing staff processes your application. Applications are processed on a first in — first out basis, and the average processing time for most applications is approximately 30 days, but can be more or less depending on a number of factors.

If your application is complete and you have met all of the eligibility requirements, the license will be issued at the initial review and will be mailed to you. If your application is incomplete, then a letter will be sent to you outlining what was missing and what we need to finish the review and issue your license. Most of the time this does not result in a delay in the processing of the application, but some non-routine applications must be reviewed by the Board for Contractors at one of their scheduled meetings.

If your application must be reviewed by the Board, you will be notified and information will be provided to you regarding the process in place to get your application processed. Washington — Washington requires a painting contractor to be licensed. Painting companies also need to be registered with the state.

Register as a Contractor for the First Time. Register with WA Secretary of State www. You can pay an additional fee for expedited service. Complete a Business License Application online bls.

Call the IRS www. Fill out the Application for Contractor Registration F and have it notarized. Purchase bond and liability insurance. NOTE: Originals of your bond and insurance will be required to complete your registration. Prepare to pay the registration fee. Go to Contractor Registration Fees page for the correct amount.

Alaska — Alaska requires all contractors to be registered. Either: a surety bond issued by an insurer or other surety company AS A completed, signed, and notarized Assignment of Cash Deposit form form b must accompany the cashiers check.

Either a certificate of insurance issued by an insurance agency or the Certificate of Insurance Coverage form c is acceptable.

The insurance must be provided by a private insurance carrier registered to do business in the State of Alaska and the policy must be specifically written to pay benefits as provided by Alaska law. According to AS For changes, see fee schedule. Check or money order should be made payable to the State of Alaska. Arizona — Painting contractors doing small house painting jobs under 5k may be free from license restrictions.

Pretty much everybody else does. Applying to get your License Applications for licensure can be obtained by contacting the Arkansas Contractors Licensing Board at Reciprocity Agreements Reciprocity is considered on a case by case basis. To be registered as an active licensed contractor in California, the board will ask for the following: Take and pass the examination for licensure. This exam is required when contractors have not served for the same qualification they are applying, or if the contractor has failed to pass the test within the past five years.

If you have been serving as a licensed contractor, and in good standing, within the past five years for the same qualification being applied, or if the contractor has passed the test within the past five years, then no examination is required. Applications for a Plumbing Contractor License can be found here. Specialty contractor licenses must be obtained directly from the municipality in which you intend to operate. How do I find out if a contractor is licensed in Illinois?

You must provide the following details in your application: a filled-out application form a description of the work you plan to do information about your business and its structure you must have proof of your financial security proof that you have business insurance. She has authored numerous articles for a variety of websites and businesses on various topics. She can help with ghostwriting, blog writing, guest posting, tech writing, etc.

Lily writes SEO content for companies looking to improve their Google search rankings. She regularly writes articles about business licenses, digital marketing, cybersecurity, fashion, psychology, etc. Lily has established a unique writing style throughout the years of content writing for a variety of websites. Painting software will streamline your business before you even start, giving you visibility and control over all your leads, sales, jobs, and tasks from a single program to get your company on the fast track toward growth.

Try JobNimbus for Free! We work with ContractorsLiability. Contractors need to win the job and stay protected at an affordable price. Quiz Services Home.

The how to get or how to answers are on this website. Business License What is a Business License? Though it is called a business license, an occupationa l business license, a home occupation permit etc. All small businesses, even home or online businesses must register for occupationa l business tax. This type of tax license is different from income, sales, or employment tax.

The small business is taxed on the basis of the nature of business, its location, the number of employees and several other factors such as the gross annual receipts. So, for example, you are a small home business selling stuff online.

You need to get a business license. How Can I get a Business License? You are issued a business license because the government regulates businesses and this is one type of regulation. For instance, they also require you to get a resale license if you sell taxable merchandise.

The bottom line is that you need to get a business license. Keep in mind that you cannot get one without first getting a fictitious business name registratio n, as is the case in Florida.

Most painting businesses just need a business license, a doing business as business name registratio n, a federal tax ID number, and a sellers permit.