Argus dc 3550 manual

Press the shutter release button halfway to lock the focus and exposure. When the orange lamp blinks, focus or exposure is locked. Press the Shutter release button fully to take the picture. Using Zoom Press the " T" to choose telephoto shooting.

See figure 2. Press the " W " to choose wide-angle shooting. Page 19 Macro Mode You can take photographs in macro mode as close as 0. A subject that is approximately 6 X 8cm can be photographed fully within the frame. Set the Mode dial to or 2. Press the Macro button until. To cancel the Macro mode, press the Macro button again until the 3.

Take a picture. Control panel Shooting Range: approximately 0. Confirm the result using the LCD monitor. Using the LCD monitor as a viewfinder makes it easy to take the close-up pictures. The setting will be canceled when the power is turned to OFF. When Mode dial is selected, the exposure setting will be displayed. Note: Not available in the Manual mode. The setting will be canceled when the power is turned off.

The exposure compensation may not work properly when shooting with the flash. White Balance 1. Press the arrows on the navigation dial to select" WB". Press the "ok" to confirm the setting.

You can toggle to the next flash mode by pressing the Flash button. Flash mode Use Auto-Flash Automatically flash in low-light and backlight conditions. Red-eye reducing Flash Reducing the subject's eye appearing red. Fill-in Flash Flash always fires Regardless of available flash.

Flash Off Flash dose not fire Never flash. Night Scene Flash working range: Slow shutter speed mode with speed as slow 1 second. When using the flash in the Macro mode, especially with wide-angle shooting, the flash may not have the proper effect. Flash cannot be enough time to charge in the Sequence mode. Press the self-timer button until appears on the control panel.

Place the Auto Focus mark over the subject and press the shutter button. The camera focuses on the subject in the frame as the front red lamp is blinking.

In this mode a timer runs for roughly 10 seconds before the shutter is released. To cancel the self-timer mode, press the self-timer button until disappears. NOTE: When using the self-timer mode, the use of a tripod is recommended. Finally, press "ok" to confirm it. Note: The setting will remain until it is readjusted. Taking a Movie 1. Use W T to select wide angle or telephoto. Press the shutter halfway to lock focus and exposure. Press the shutter fully, to record movie until the gauge is full.

This usually happens within approximately 12 seconds. Set MODE dial to and press to display. Multi Frame Mode: "ok". Press 2. Press to toggle between multi frames mode. Use 4. Press if you want to resume and select another. Press to specify the photographed image under single frame mode.

Slide Mode: "ok". The images that are displayed will be a slide. Enlarge Pictures using Zoom mode: 1. You can enlarge the preview to check the image. Zoom in different parts of the image. Pressing "ok" reverts picture to zoom out. Set MODE dial to 2. Multi Frame Mode: 1. Press Use 3. Press 4. Press "ok". Press "ok" could be pause. Play movie: 1. Press "ok" to play the movie when data is loaded.

Press "ok" again, could be pause or resume. Press "ok" to select Delete one or Delete all. Important Never open the card cover, eject the card, remove the batteries, or pull the plug while erasing pictures.

It may destroy the data in the card. When the picture is protected or the write-protect adhesive seal " "MARK is placed on the picture the camera does not erase it. Cancel the protection or remove the seal use " "to switch "LOCK?

Managing Pictures 1. Press "ok" to select Protect one or protect all. The protected picture will not be deleted with all-Frame erase. When using card format, it will erase all protected and unprotected pictures. Delete is not available when the write-protect adhesive seal is placed like " MARK". See Figure Need help? Post your question in this forum. Report abuse Libble takes abuse of its services very seriously. Product: Spam. Hateful or violent content For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

Personal or private information For example, a credit card number, a personal identification number, or an unlisted home address. Promotion of regulated goods and services. Forumrules To achieve meaningful questions, we apply the following rules: First, read the manual; Check if your question has been asked previously; Try to ask your question as clearly as possible; Did you already try to solve the problem?

Therefore, avoid filling in personal details. Register Register getting emails for Argus DC at: new questions and answers new manuals You will receive an email to register for one or both of the options.

The manual is 9,01 mb in size. The manual is sent by email. Check your email If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual. Page 16 Monitor display LCD will display the last image of still picture. LCD will display the last image of movie picture. The images that are displayed will be a slide.

Set the Mode dial to 2. Compose the picture by placing the subject within the autofocus marks in the viewfinder. Press the shutter release button halfway to lock the focus and exposure.

A subject that is approximately 6 X 8cm can be photographed fully within the frame. Press the Macro button until To cancel the Macro mode, press the Macro button again until the 3. Take a picture. Page Exposure Compensation Exposure Compensation In addition to automatic exposure, you can also adjust it manually. When Mode dial is selected, the exposure setting will be displayed. You can toggle to the next flash mode by pressing the Flash button.

Press the self-timer button until 3. Place the Auto Focus mark over the subject and press the shutter button. The camera focuses on the subject in the frame as the front red lamp is blinking. In this mode a timer runs for roughly 10 seconds before the shutter is released. Page Beep Sound Beep Sound 1. Note: The setting will remain until it is readjusted. Taking a Movie 1. Page 24 Viewing Pictures Playback Pictures button to specify whether the image appears after picture is taken.

MENU 1. Set MODE dial to 2. Press 2. Press to toggle between multi frames mode. Use to display the image from 6 frames. Multi Frame Mode: 1. Page 26 Deleting Pictures 1. Press the and use navigation dial MENU Page 27 Note: The protected picture will not be deleted with All-Frame erase, but will be deleted with Card format. Delete is not available when the write-protect adhesive seal is placed like " The setting will remain until it is readjusted.

Page 30 Installing Software 1. Insert the installation CD into the CD driver. Page 33 Note: Screen display the driver file name automatically. Then click Next Page 35 Note: Select locations of data source. Screen display windows has finished installing.